Sensitivity | 10 levels, 0-9 |
UltraMETER display | Indicates optimum sensitivity level, 0-9 diagnostic aid |
Loop frequency | 4 settings (low, med-low, med-hi, high) |
Loop inductance | 20-2000µH (Q factor > 5) |
Grounded loop | Isolation transformer allows operation with poor quality loops |
Automatic tuning | Detector tunes to loop on power-up and following frequency count function |
Environmental tracking | Automatic compensation |
Surge protection | Loop circuitry protected by surge suppressors |
Detect output | Solid-state (open collector) |
Output B | Solid-state (open collector) |
Output B inverted | Solid-state (open collector) |
Power / loop fault indicator | Green LED |
Detect / frequency count indicator | Red LED |
Detect-on-Stop | Requires vehicle to stop for a minimum of 1 second (1-2s typical) |
ASB (Automatic Sensitivity Boost) | Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles |
Power | 12VDC-24VDC |
Operating current | 15 mA |
Operating temperature | -40C-82C (-40F-180F) 0-95% relative humidity |
Dimensions (L x W x H) | 3.0"(76mm) x 0.9"(22mm) x 2.75"(70mm) |
Weight | 0.15 lbs. (68 g) |
Connector | 10-pin female |